How to Prevent Condensation on Windows

Winter brings an entire variety of problems for your property whether it’s maintaining a comfortable temperature level, sweeping up nonstop stacks of leaves or tidying up after muddy boots. For some individuals, condensation is up there with these pesky winter season issues.

In this post, we look at what causes condensation on windows and some ways you can remove or prevent the problem entirely.

Why do my windows get condensation?

As the weather condition gets colder, condensation begins to build up on the windows of homes throughout the UK, leaving windows looking misty from both the inside and outside. It’s more than simply undesirable too. Condensation ultimately rolls down off the windows leaving pools of water on your windowsill. However what causes condensation in the first place?

It comes down to 2 aspects temperature and humidity. Air naturally includes wetness, holding more water vapour when it’s warmer. As we heat our homes and continue to finish day-to-day jobs like showering and cooking, the air in our residential or commercial properties becomes more damp holding more moisture. Here are simply a few more things that can make the air more humid inside your house:

  • Boiling the kettle
  • Drying laundry
  • Gas heaters
  • Increasing wet
  • Breathing – yes, even the air you breathe out consists of moisture
  • While it’s held by the warm air, wetness is naturally brought in to the cold. That’s why, when you ventilate your home, the warm moist air will go out to the cold outside. The issue occurs when your residential or commercial property likewise has cold surfaces- namely, windows.

Cold windows will bring in the warm, damp air. When the humid air comes into contact with the cold surface, the water vapour condenses into a liquid, which rests on the windows. That’s what we know as condensation.

Getting rid of or avoiding condensation?
To remove or avoid condensation, you need to tackle one of those two aspects temperature or humidity. One option is ventilation, which will draw warm, wet air out of your residential or commercial property. Opening your windows for a few minutes every day will make a substantial difference. The issue is this will likewise make your residential or commercial property cooler, costing you more in energy costs to heat it back up.

A dehumidifier will eliminate wetness from the air without eliminating heat. However, it will likewise disrupt the look of your home and utilise more energy. Not to mention that it requires to be cleared from time to time. The primary issue here is that a dehumidifier doesn’t really take on the problem on a long-term basis.

You might likewise think about long-term ventilation such as attic vents, entire home fans and ceiling fans. Exhaust fans in the restroom and kitchen area will likewise extract moisture that’s created when you’re cooking, boiling the kettle, bathing or bathing.

Can I avoid condensation on my windows?
The best method to prevent condensation on windows is to deal with the origin– the cold surface area. Not all windows have a cold surface, and those which do can be fixed. One typical alternative is to have actually brand-new windows set up.

Will new windows stop condensation?

Often, yes. Double glazing stops condensation occurring by eliminating the cold temperature level on the within your windows. The two panes of glass are separated by a little gap, usually around 4-20mm. This supplies an important extra layer of insulation between the two panes.

So, while the exterior pane of glass will naturally become chillier, the interior pane will not end up being as cold. It won’t draw in the humid air inside your property, and the concern of condensation will be avoided.

Common mistakes with double glazing
That said, new windows are not always the very best choice. As being pricey, having new windows set up is highly disruptive for your home. It suggests having the complete unit gotten and replaced, not to mention waiting for specialists.

When they’re in location, double glazing units sometimes develop their own condensation issues. A little break in the seal around the edge of the windows will allow moisture to enter and condense in between the two panes.

It’s likewise stressful searching for windows that match your home’s design, especially if you’re in a heritage structure. There are further problems in a noted residential or commercial property, where changes to key components like the windows are typically restricted.

What about secondary glazing?
Secondary glazing is a condensation service which doesn’t require any changes to existing windows. Instead of setting up brand-new windows with several panes, a secondary pane is fitted on the inside of existing windows. This develops an insulate, well-sealed gap in between the two panes which avoids the temperature plummeting on interior glass.

When designed and installed with accuracy, secondary glazing is discreet and maintains the appearance of the initial windows. It’s recommended by historical England for Grade I and II noted buildings and utilised by the National trust together with numerous other conservation areas.

Most importantly, it has a series of advantages that surpass removing condensation alone. Secondary glazing enhances thermal insulation, reduces noise levels and increases security for your residential or commercial property.

So, you can wave bye-bye to the condensation on your windows and make your home warmer while doing so.

For all your Glazing needs, contact your Local Emergency Glazier in Dagenham.

How to Boost the Value of Your Listed Building – Energy Efficient Windows

Whether it’s an extension, new roofing or double-glazed home windows, most individuals intend to raise the value of their residential or commercial property. While there are lots of different ways to make upgrades, it’s not so simple for provided structures. Regrettably, as they’re protected by legislation, a great deal of conventional residence enhancements aren’t acceptable.  Fortunately is– with a few simple suggestions and methods, it’s entirely feasible to include substantial value to your listed building. Keep reading as we check out 3 simple steps.

1. Bring back architectural functions

By definition, all provided structures are distinct and different. But one thing they have in common is age. Examples of detailed structures built after 1945 are rare. Therefore, it’s not uncommon to find architectural problems that have established over the decades or even centuries:

  • Missing roofing system floor tiles
  • Rotting roofing system decking
  • Roofing leaks
  • Bowing wall surfaces
  • Fractures in wall surfaces
  • Unpredictable floors

While they might appear unpreventable after extended periods, these problems can knock significant worth off noted structures. With that in mind, it ought to be initially on your listing to obtain them arranged. Due to the fact that they are vital to the health and wellbeing of the home, the fixings are far more likely to be approved by your regional preparation authority.

2. Work on the exterior

Listed buildings may appear in a globe of their own, compared to unlisted residential or commercial properties. However, they’re certainly not excuse from the biggest value-adding practices of standard property-selling. The very best example is kerb allure, which is the attraction of your residential property from the exterior. It’s what gives visitors– as well as possible customers– their impression.

While yard structures like wall surfaces as well as outhouses are generally protected, there’s a great deal to be stated for some straightforward improving help the garden. Improve trees, plant seasonal flowers and see to it the front of your residential or commercial property is clear of fallen leaves or any sort of clutter.

3. Energy performance

Your detailed structure may have the style and also the personality of the eighteenth or 19th century, but that doesn’t imply it has to have the energy performance of those durations. Power saving renovations enhance residential property values by approximately 14%, as well as conserving you money on power costs in the long run.

A key area for power efficiency is the windows. If you do not wish to impair the original style of your building, use secondary glazing to offer high-performance thermal insulation without affecting the style and structure of your home windows. Furthermore, you can likewise purchase a power reliable boiler as well as radiators, include draught-proofing on exterior doors and think about loft space insulation to quit warm leaving through the roof covering of your residential property.

For all your Glazing needs, contact your Emergency Glazier in Bromley.